Inductive Switches

The (safety) inductive sensors of the IS Series in M30 are designed for the protection and / or monitoring of doors, machine flaps and robots. The (safety) inductive sensors are dirt-sensitive and can be used in almost all industrial areas. The sensors detect metals (e.g., St37). Thus, no magnets or other encodings are needed on the opposite side of the sensors. Due to the sensor construction, a bridging is possible.

Depending on the sensor type, switching distances of 2mm to 40mm (square version 80mm x 80mm) are possible. The downstream safety modules are freely selectable. Additional Ex devices such as disconnect devices or Zener barriers are not required! The sensors have a CE marking, as well as the GS symbol (category 4 of personal protection) of the MMBG.

Key Features

• Applicable for Ex Zones 1, 2, 20/21 and 22 (Gas and Dust)
• Safety integrity level (SIL) 3 according to IEC 61508
• Performance level (PL) ‘e’ according to EN ISO 13489
• Switching distances 2 - 40 mm
• PNP/NPN, analogue 0-10 V / 4-20 mA, fail-safe
• Design M30, cuboid
• Customer-specific special designs on request

Applications

• Attendance check
• Positioning tasks

Data Sheets

	ISD-10-B-GD
	ISx-NS-10-B-GD